Getting Full Screen Photos for Incoming Calls on iOS

Getting Full Screen Photos for Incoming Calls on iOS

If you have an iPhone, when a call comes in from one of your Contacts to whom you’ve assigned a picture, by default their picture appears at the top of your screen in a small circle like this:


That’s pretty small. Fortunately there’s a simple and apparently undocumented trick to getting a full screen picture:

  1. Open the Contacts app.
  2. Navigate to the contact whose picture you want full screen when they call.
  3. Tap the Edit button in the upper-right corner.
  4. Tap Edit under their photo on the left-hand side then choose Edit Photo from the popup menu.
  5. Drag the photo just a tiny bit to ever so slightly reposition it.
  6. Tap Choose in the lower-right corner.
  7. Tap Done in the upper-right corner.

The next time they call you, you’ll get a full screen picture like this:



Nest: Another Company You Can Count On

Nest: Another Company You Can Count On

wrote recently about how Sony let me down for the third time whereas Apple, under a very similar circumstance, proved once again that they are a company upon which you can rely.

I’ve just had yet another customer service experience with a consumer electronics company when a product of theirs I had purchased, failed. Like the Sony and Apple products, this one was also connected to the Internet through my wifi. It was one of my Nest Protect smoke alarms. They are great. I wrote about them last year.

A few nights ago, one of the Nest Protect smoke alarms went off around 1AM in the morning. All of the units began announcing that there was smoke in the living room. We all got up (except my son who miraculously slept through the entire event – I’ve got to get his hearing checked) and went to the living room only to discover no indication of smoke. We shrugged our shoulders and went back to bed. About 5 minutes later, it went off again. This time, I went to the garage, brought in the ladder and removed the offending Nest Protect. I then called Nest. Someone answered quickly and after I explained what had happened, they determined that it was likely the smoke sensor that had failed. They then told me they would express ship me a replacement unit which arrived the following day. Unlike Sony, Nest never asked me to prove the unit was still within the warranty period. I bought these units from Amazon so the only way Nest knew I had them was that they automatically register themselves with Nest over the Internet, just as you’d expect any electronics product connected to the Internet to do. I just installed the new unit and will be shipping them the failed one (with the pre-paid shipping bag they included with my replacement unit) back to them for their analysis.

This is the kind of customer service I’d expect from a company that stands behind their products and hopes that their customers will recommend them. As I said in the last blog post about Sony vs. Apple, a product is only as good as the customer service you get if and when that product fails. Sony gets an F from me for customer service. Apple and now Nest, get an enthusiastic A. Thank you, Nest.

An excellent, bluetooth speaker

An excellent, bluetooth speaker

Last Christmas my kids bought me a small, waterproof bluetooth speaker so I could listen to music while in the shower. It worked as advertised however, the sound quality was lacking (it didn’t have much bass) and the battery didn’t last very long. It seemed like I was recharging it about once a week or so. It also didn’t have much of a range, requiring my phone to be within 10 feet or so for a good connection. You may have seen this type before. They look like this one:


They don’t cost much, around $10 to $15 on Amazon, but you do get what you pay for.

A Better Option

I wanted better sound quality and a longer lasting battery. I found both in the Hydra, a water and shockproof, bluetooth 4.0 portable speaker from Photive.


The Good

The Hydra has good bass, mid-range and highs for a small, portable, wireless speaker. It’s waterproof so you can keep it in the shower or bring it out on the patio and not worry about it getting wet. The battery must be pretty big because the it weighs more than you’d expect which to me means that most of the weight is the battery. That’s good because the battery lasts a really long time. I use my Hydra every day for perhaps 10 to 15 minutes at a time and I literally can’t remember how long ago it was that I recharged it. I’d say it lasts at least a month but probably closer to two months.

Pairing the Hydra to your smartphone or computer is simple since it shows up as discoverable device. Once you turn the Hydra on, there’s a button on the back that will connect it to your device quickly. Just a single press and you’re ready to go. There are also buttons to increase/decrease the volume, skip to the next track or go back to the previous one. These buttons, despite being on the back of the unit, are easy to reach as the unit is designed to point upward with both the front and back at 45 degree angles.

When you do need to recharge it, the unit comes with a USB cable that connects to a port protected behind a rubber cap on the right side of the unit.

The Bad (well, the somewhat bad)

There are two downsides to the Hydra. First, the on/off switch is also behind that rubber cap which means you have to remove it to turn it on and again to turn it back off. I can’t imagine why they didn’t make the on-off switch a pushbutton like the rest of the buttons. This isn’t a huge deal as it only takes a few seconds to pop the cap off, press the on/off switch then pop the cap back on. Still, it’s one thing they could improve. Second, some wireless, waterproof speakers allow you to answer a phone call. The Hydra doesn’t have this capability. If this feature sounds good to you, I’ll tell you that in reality, it’s not. I tried it with my the small, round speaker my kids bought me. It’s not that easy to hear the other person because of the noise your shower makes and it’s not all that easy for them to hear you. It’s also, believe it or not, a little awkward once they realize you’re talking to them from the shower.

The Hydra is not inexpensive. It’s $146 on Amazon compared to only $15 so for the small, round ones. However, the difference between them can’t be overstated. You really do get what you pay for. If you want quality sound from a speaker you can get wet and won’t need to be charged weekly, the Photive Hydra is a great choice.


Update: March 9th, 2017

After about 10 months the screws that hold the front speaker screen on began to rust. I contacted Photive and they offered to replace them if I sent them the speaker. I asked if they could just send me the screws and they did so at no charge. It look me a total of 5 minutes to replace them. I appreciate their customer service.

The Chip Card Disaster

The Chip Card Disaster

Credit cards have never been terribly secure. I’ve eaten at a restaurant on a Friday night and by Sunday realized I left my card there and the waiter had taken it to the bar district that night. From the charges, I’d say he bought a round for everyone.

These one-off fraud cases aren’t the real problem though. The problem has been the large retailers who store customer credit card numbers by the millions with less-than-ideal security. The hackers break-in and everyone needs a new card.

So the credit card industry decided a more secure card was the answer. Today’s chip cards no longer provide your number to the retailer (despite it still being written in large, friendly numbers on the front of your card). Instead, the chip card has encrypted data on it that is transmitted to the vendor’s credit card processor. The vendor themselves never gets your card number.

Almost a year ago, here in the US, we were supposed to be switching to these new chip cards that have been in use in Europe for several years. While I’m seeing more and more of them these days, about half are like the one above, with the chip reader taped off and a message telling us to swipe instead. If you wonder why, you’ll know once you try using one.

When they do work, the user experience is nothing short of awful. First, why do I have to insert this card and then wait? Who thought changing the way people have been passing their card info (swiping) was a good idea? Swiping wasn’t a great idea to begin with since it’s not obvious which way you should hold the card when swiping it. We eventually learn of course but it’s not obvious.

Quite often I’m stuck in line behind some poor shmuck who is just trying to pay for his turkey sandwich and can’t figure out which of the four possible ways this card could go in to the reader is the right one. Swiping a card takes half a second. These chip cards take something like 10 seconds to authorize. I could literally type in the number, digit by digit, faster. And when you get the card in right, when finally unlock that achievement, you’re reward is a loud alarm sound  suggesting to everyone around you  that your card has been declined. What panel of experts thought this was an improvement?

It’s my guess that most of the chip card-enabled readers actually work but the retail staff are so tired of the problems they create, they just pretend they don’t work.

Let’s compare this with ApplePay, Apple’s iPhone-based payment system. I pull my iPhone from my pocket, position it near the card reader and rest my thumb on the Home button. My screen comes on showing my default card and a little animation appears indicating that it’s detected my valid fingerprint. It ends with a friendly checkmark on the screen and a happy bling! sound. The entire process takes 1 second tops. It’s simple, faster than getting my card from my wallet and just as secure as a chip card. I presume Android Pay is similar though I have no experience with it.

This chip card transition is like a Greek trajedy. Almost every aspect of it that could be done poorly, was. Fortunately, more and more retailers are taking Apple Pay and Android Pay. If you work for one that doesn’t, please urge your employer to do so post haste. Paying for my turkey sandwich should never be the most complicated part of the transaction.

The Austin Uber Backpedaling Begins

The Austin Uber Backpedaling Begins

Bang! It hasn’t even been two weeks since Uber and Lyft left the Austin market and already the Austin City Council is beginning to backpedal on their demand that ride-sharing companies do fingerprint background checks on their drivers.

The Austin-American Statesman is reporting that Austin City Council member Ellen Troxclair has suggested that Austin should make fingerprint background checks optional just as San Antonio and other cities have done. Shocking. Why didn’t the Austin City Council simply look at how other cities have dealt with this problem in the first place? Why waste hundreds of thousands of dollars of taxpayer money which resulted in nothing but loss? What do I mean by loss?

  1. The City of Austin spent who knows how much in City Council members time debating this issue as well as the cost of having an election on Proposition 1.
  2. Thousands of Uber drivers found themselves out of work.
  3. Thousands of Uber passengers had to find alternative and usually more expensive or less convenient forms of transportation.

Was there a winner here? No. Austin will almost certainly adopt optional fingerprint background checks just as other cities have.

The sad thing is that even those optional fingerprint background checks don’t solve any problems. They are purely security theater. A few people who care might feel safer but that doesn’t mean they are. Additionally, all 7 of last year’s reports of sexual assault by Uber drivers came from drunk, young women none of whom will be in a state of mind to request only an Uber driver who has passed a more rigorous background check when they stumble out of a Sixth Street bar at 2AM on a Saturday night. So even they won’t be any safer.

My original post on this caused several people to tweet at me about how Uber is some big, bad corporation with greedy investors who care nothing about passenger safety and want to squeeze their drivers while they sit in high towers twirling the ends of their mustaches. It saddens me that anyone lacks the critical thinking skills to the degree that they would believe such nonsense.

Of course Uber cares about passenger safety. If Uber had a widespread reputation for being unsafe, they would be out of business. Caring about passenger safety is good for Uber’s profit. Having said that, like many investments, there’s the law of diminishing returns.There’s a point at which riding with Uber is safe enough. As I stated in my last post on this topic, Uber is already extremely safe. You are more likely to be hit by lightning than assaulted by an Uber driver. There’s a point at which Uber won’t benefit by trying to make their service even safer and in fact will instead cost them which ultimately costs the consumer. How does that work?

Like any business, Uber is in this to make a profit. If you think that’s a bad idea, you don’t like free markets and should probably stop reading now. The more expense they have, the harder it is to make a profit. That leads either to charging customers more per minute or making less profit. They won’t do either unless they have no choice. You may think that regulations can be put in place so they won’t have a choice. That’s faulty logic. People always have a choice. If regulations make providing ride-sharing unprofitable or simply less profitable than deploying their money elsewhere, Uber and its shareholders will move on. That’s exactly what they did do when this ridiculous regulation could not be over-turned. They exited the Austin market. Would you leave your money in a savings account that paid far less interest than at another bank? Would you leave your money in a poorly-performing stock when you knew of a better one? Would you keep paying for your child’s college education when they were spending so much time partying that their grades were suffering? Of course not.

Why would Uber leave over such a silly little thing as requiring fingerprint background checks? Because it’s not a silly little thing. Uber knows better than anyone that fingerprint background checks don’t solve any significant problems but they do make the process of hiring drivers more onerous. If they don’t make sure there are enough drivers, enough supply for the demand, passengers will no longer feel that Uber is a reliable service and they will stop using it. This isn’t Uber’s first rodeo. They have been down this path before in other cities. In most every case, the city eventually receives enough complaints about Uber leaving the market that they backpedal (as Austin is doing now) and make the fingerprint background checks optional. The fact that Uber was willing to leave the market over this should tell you something.

Most people work for someone else. Unfortunately, that leads to a very one-sided view of how businesses work. It’s been tweeted at me that Uber pays less than minimum wage (they don’t) and that as a result, Uber drivers must rely on government welfare. Let’s examine that for a moment. First, we don’t know that this is even true but let’s assume that it is. Bob is an Uber driver. In our fictional scenario, Bob can’t make enough driving for Uber so he qualifies for government benefits. Why doesn’t Bob stop driving for Uber and take that high-paying corporate job he keeps getting offered? Because no such job offer exists. Bob drivers for Uber because Bob thinks thats his best option. If there was a better one, Bob would likely take it. In other words, if Bob stops driving for Uber and goes to work elsewhere, he’s likely to earn a similar amount of money which means he is just as qualified for government assistance as before. Nothing has changed. If Bob could earn more elsewhere he wouldn’t be driving for Uber. This is the same argument that has been used with Wal-Mart. I quite rarely shop at Wal-Mart nor do I own stock in the company. I’m no fan. However, if people who work at Wal-Mart could make better money elsewhere, they would do so. Since they can’t, they are no more reliant upon government welfare than they would be any where else. If they instead increase their skills to the point where they make enough to no longer need welfare, great. However, that is up to them, not their employer.

It has been tweeted at me that Uber is under-cutting taxi services. That’s a charge that is absolutely true. That’s the free market folks! That’s competition. That’s how the world becomes more efficient. Someone finds a better way and people pay for it. If the taxi services had been smarter, they would have seen Uber coming. They would have become Uber before Uber ever arrived. They didn’t because people tend to get stuck in their old habits. Companies are as guilty of this as anyone else because companies are made up of…wait for it….people! Do you want to know why Apple is the biggest publicly-trade company in the world with profit margins that other companies only dream of? Because Apple admits to something that the overwhelming majority of other companies do not: there’s someone else out there right now working on creating the product that will obsolete what we sell so we better do it first. Apple doesn’t care that the iPad might result in fewer Mac sales because they are still making money. If Apple doesn’t create it, someone else will.

I have been self-employed most of my adult life. It’s not easy. I remember hiring my first employee (Jason, who still works for me 20 years later btw) and thinking, “What if I can’t generate enough revenue to pay his salary? That would mean he can’t pay is rent or buy food!” Being an employer is a huge responsibility. That feeling never goes away. I’ve been running my current business, Xojo, Inc., for 20 years now. While I have gotten used to the feeling of responsibility for my employees and while it’s easier to manage that responsibility than it was when I first started, I still feel it. Being self-employed changes you. It changes how you look at the world. It makes you realize that there are two-sides to everything. The best thing is being able to see any situation from all sides so you can most efficiently resolve it. We would be better off if everyone, at some point in their lives, ran their own business.

That’s not likely to happen but what can happen is for more people to apply critical thinking to situations they encounter. When faced with a problem, try to avoid immediately getting caught up in the emotions of it and instead apply some rational thinking. Try and see it from all sides. Do some research (which with the Internet is so easy now) and see if the problem really does exist and is big enough that we should spend time and resources to resolve it. Not every problem is actually worth solving. We don’t have unlimited resources. We must prioritize our activities. You can do a few things really well or a lot of things really badly. Critical thinking helps us realize this and it’s something we could use a lot more of in today’s society.

I’m confident that Uber will be back in operation here in Austin within the next 30 days or so. I’m glad for that because it’s a valuable service that I have only just begun to utilize. I’m also glad that the Austin City Council has at least one reasonable member in Ellen Troxclair.

Uber is leaving Austin and your city might be next

Uber is leaving Austin and your city might be next

So it appears there’s a huge dearth of critical thinking in Austin, Texas. There was a vote today on proposition 1 which was attempting to repeal the Austin City Council’s requirement that ride sharing companies like Uber and Lyft do extensive background checks on their drivers.

On the surface this might seem ok. After all, if Uber does more background checks, Uber passengers will be safer, right? Wrong. Uber drivers collectively conduct 1 million trips every day around the world. If Uber had 100 assaults each day it would be an epidemic that would put them out of business and yet your odds of being attached would then be 1 in 10,000. You are almost certainly far more likely to die in a car accident while riding in an Uber car than to be attacked by an Uber driver. For example, your odds of dying in a car accident are about 1 in 100. It should be needless to say that using Uber is very safe. Nothing is completely safe of course. People die in their sleep every year by being strangled to death by their sheets but that doesn’t keep us awake at night.

Let’s say you are a violent person out there looking for the best way to find your next victim. You could choose to simply find people who are home alone, break-in and assault them. If you’re smart, you’ll wear a mask and gloves so you leave little or no evidence behind. Instead, you decide to use Uber to find your next victim. Never mind the fact that everything about your transaction (your name, address, photos of your driver’s license and insurance as well as detailed photos of your car, the passengers name and address, as well as when you accepted the trip, when and where it started, the destination, the time it began and more) will all be tucked securely away on a server of which you have no access. The evidence supporting the victim’s claim that they were assaulted by you will be overwhelming. You’d have to be the stupidest person in the world to think that attacking your passenger is a good idea.

So the city council first wasted tax payer dollars coming up with this ridiculous idea in the first place then Uber has had to waste their time and money trying to fight it. Finally, the ignorant voters, only a tiny percentage of which bothered to vote, came out against the proposition. Worst of all is that the people already have a choice. If you think Uber is dangerous don’t use it.

Now Uber and Lyft will abandon the Austin market all because some ignorant city council members couldn’t be bothered to do a little critical thinking before wasting taxpayer dollars to stifle a valuable service. For those that think Uber is bluffing, they have already announced they are pulling out of Austin effective Monday morning and they have done this before in other cities. If it’s happening in a high-tech city like Austin, Texas with an very educated population, it can happen where you live as well.

Folks, we need more critical thinking. We all need to use common sense, do a little more research and spend a little more time considering our decisions before just reacting to every little headline that comes along. We should all know by now that the media is NOT aligned with our best interests. Their job is to create juicy headlines so you’ll see the ads that make them money. The next time you are outraged by a headline on Facebook or Twitter, spend an extra minute or so to determine if it makes any sense before clicking that Share button. You’ll be the better for it and you’ll be providing a valuable service by not spreading the news equivalent of cow manure.

In this world of instant 24/7 news and social media that can spread a story at nearly the speed of light, it takes an extra level of vigilance and critical thinking to be part of the solution rather than part of the problem.

Update (5/11/16): In 2015 The Austin Police Department received 7 reports of alleged sexual assaults committed by Uber/Lyft drivers. What percentage of all fares does this represent? I’ve read there are about 5000 Uber/Lfyt drivers. Let’s assume the average driver handles only 2 fares a day to account for the many drivers that only occasionally drive. That’s 3.65 million fares a year. Divide the 7 assaults by 3.65 million and you get just under two millionths of one percent. That’s a microscopic number. This does not seem like a problem worth solving with tax payer dollars. Note that almost all if not all of those reports were made by young, drunk women. While these women certainly deserve to be able to get home without being assaulted, this problem is actually too small to be worth addressing with tax payer dollars. I don’t wish to be insensitive but we wouldn’t be willing to spend $7 million dollars to stop 7 alleged assaults, right? That means there must be a cost-benefit analysis there’s just no way the cost-benefit analysis works here. Uber knows this. They know that in a few months the Uber users will pitch a fit, the City Council will make the background checks optional and Uber will return.

Geeking out on the Nest Protect

Geeking out on the Nest Protect

I really love smart home stuff. When we built our house two years ago here in Austin, Texas I had the builder install a Nest Thermostat. The best thing about it is the motion sensor which can tell when the house is empty and set the AC to come on at a higher temperature which saves money. This past weekend I installed 8 Nest Protect smoke/carbon monoxide alarms, replacing the dumb First Alert alarms that came with the house.

Had I known I was going to write this blog post, I would have taken more pictures during the setup and installation process but I have described it very well below.


There are many great reasons to buy the Nest Protect. The most important of all reasons is that if you are away from home when a fire starts, your phone will alert you of this fact which could mean the difference between a small fire and your house burning to the ground. It’s unfortunate that insurance companies haven’t yet caught up to this new technology and offer a discount for homeowners that install them. Apparently the Protect can also tell the difference between burnt toast and a real fire though I haven’t had a real world test of that yet. When we occasionally do burn things on the stove, our old smoke alarms would go off filling the house with that ear-shattering sound that can only be silenced by furiously waving a magazine at the smoke alarm until it no longer senses smoke. With the Protect, you just take your phone out of your pocket and tap a button to silence it. I’m actually looking forward to our first toast burn.

The Nest Protect has other helpful features as well. It checks itself many times a day and the app will tell you the results. If the backup battery needs to be replaced, the app will tell you rather than waiting for the battery to die and waking you up at 2AM wondering why your house is making a loud chirping sound. Each Protect has a light on it which can be set to come on when you walk underneath them. This makes for a handy night light especially in living rooms and kitchens. Don’t try to test this feature with the lights on. I almost called Nest to complain it wasn’t working when I realized that the Protect must have a light sensor so that the pathway feature doesn’t come on unnecessarily. If you have a Nest thermostat, when the Protect detects smoke, it will tell the Nest Thermostat to shut off your AC so that it doesn’t blow smoke and potentially hot embers through your house.

One a month, the Nest Protect will automatically test the smoke and carbon monoxide alarms. You can’t tell it what day to do this but you can tell it a range of hours. It defaults to between 11AM and 4PM.

The Nest Protect’s motion sensor can work with your Nest Thermostat as well such that if it doesn’t detect anyone walking under or near any one of them for an hour, it can set your Thermostat to “away” saving you money on your AC. Nest has recently added a geo-fencing feature to their app as well so it can tell when any of your phones (and thus you) are home or not and immediately switch the AC to away when no one is home. At this point, my AC really has no excuse to be on when we are away from home.

If there’s a downside to the Nest Protect, it’s the price. The alarms I was replacing cost between $15 and $30 new on Amazon. The Nest Protect is $99: each. When you need 8 of them, that’s a lot of dough. What I have told myself is that if it saved our lives or just kept a small fire from becoming a huge one, it would be worth it. There’s value in the secure feeling you get from knowing you are doing your best to protect your family.


Before you buy them, determine if your smoke alarms are wired into your house or run on a battery. This is different from them having a backup battery. They will have one of those but they may also be wired into your house, receiving their power from the house itself. This is important to know up front because Nest sells two different models, one that runs on a battery and one that is wired meaning that it uses the wires in your house for power.

I wanted to buy them locally so that in case there was a problem, I could just return them. This turned out to be more difficult than I had ever thought. I needed 8 alarms and most places I called only had a couple of them in stock. I ended up buy 3 of them at my local Best Buy (which had plenty of battery models but only 3 wired ones) and then driving 25 miles to a Home Depot in Dripping Springs to get the other 5 I needed.

If you’re not in a hurry, it might be worth just ordering them from Amazon. They sell both the wired and battery-powered versions.


I’m no electrician though I have installed some timer switches and 3 ceiling fans in our house. Having said that, I’m confident that anyone could install a Nest Protect alarm. It’s easy. Take them out of their boxes then install the Nest app on your phone and it will walk you through the setup process. It’s easier to set up them all up at once so if you’re planning to replace a bunch of them, do yourself a favor and do it all in one go. Nest provides an installation video on their site. I highly recommend watching this before you even purchase the Nest Protect. If the installation looks like something you don’t want to do, you can hire someone to do it for you. Nest can even refer you to a local installer.

The app has you identify each unit via a QR code on the back which you scan with your phone’s camera. It asks you to identify your WIFI network and enter the password. You only have to do this last part once. After that, the setup process copies this information from a Protect you have already set up to the next one. That was pretty smart. As you go along, you choose a location name from a pre-defined list for each Protect. You then write that location name on the back of the unit to help you install the right one in the right place. By choosing a location name, the Nest Protects can alert you by voice of any problems with a particular Protect unit. In my case, I had two in the living room and two in kid’s rooms. Fortunately, you can add a custom label. For example, for the kid’s rooms I added their names as the custom labels.

Once they are all set up, it’s time to actually install them. If you have wired smoke alarms like I do, you’ll need to go to your fuse box and find the switch for your smoke alarms. Hopefully your house was built with a dedicated circuit for the smoke alarms. Mine was but not all are. Turn off that switch so you don’t electrocute yourself. For extra safety you can buy a circuit tester for a few dollars at your local hardware store. It’s got two prongs (black and red) which you just touch simultaneously to the back and red exposes wires. If the light on the tester comes on, you’ve got a hot wire so you didn’t flip the right fuse switch.

The first thing you need to do is remove the old smoke alarm. Most twist off. Then you’ll need to unplug them from the wires in the ceiling (if they are wired like mine). This is harder than it sounds. It requires a bit of force and you’re doing this while perched precariously on a ladder so be careful. Next you need to remove the mounting plate for your old alarm. There’s usually two screws holding it in. Here’s where I’m going to save you a lot of time unless you’re smarter than me. It took installing 4 of them before I realized that I didn’t need to completely remove these screws! Just loosen them a bit and you should be able to rotate the mounting plate enough to remove it. Nest provides their own so you can just slip the new one on and tighten the two screws. The Nest-provided mounting plate is smooth on one side and has ridges on the other. The plate needs to be installed with the ridged side facing the ceiling or wall.

The Protect comes with its own connector which needs to be wired into your existing wiring. Your old one has to be removed first but this is easy because there are just little wire connector caps that you unscrew to disconnect the old connector from your wiring. The new Protect connector connects the same way. Then you plug the new connector into your Protect, push your Protect up against the new mounting bracket you have installed and turn the Protect clockwise until its locked into the mounting bracket. The first one will take you 15 minutes. The rest will take 5 minutes each.

Testing 1, 2, 3…

The final step is to test them. You can do this by pressing the big button in the middle of the Protect. The Protect will then speak, telling you to press the button a second time to test. At this point the Protect will give you 10 seconds to move away as the test is understandably loud but also short in duration. It will test all of your Protects at once so there’s no need to repeat this for each one. That’s it. You’re done.

A Problem with an Inconvenient Solution

Because the location list Nest provides is pre-defined, you can end up with multiple Protects that have the same name. I have two in the living room and I have two kid’s rooms for example. As I mentioned, they provide a custom label so you can distinguish between two with the same pre-defined location name. The problem is, you don’t define these custom labels while setting up your Protect. I don’t remember that being an option. The result is that I got them all installed only to then discover that I couldn’t tell which Protect was the one on the left side of the living room versus the right. I couldn’t tell which Nest was in my son’s room versus my daughters. The Nest app simply listed the Protects by their pre-defined location names.

After searching in vane for a button in the app I could press that would test a specified alarm or just turn the light on for a moment, anything to identify a specific Protect, I called Nest to find out what the solution was. The only solution offered turned out to be wrong. They suggested I press the button on one of the living room and kid’s room alarms then look at the alarm history in the app to see if that one shows that it was tested. That seemed easy enough but they said I’d have to wait a day before the app would show that it had been tested. Unfortunately, there was nothing in this suggestion that turned out to be true. First of all, as I mentioned earlier, when you test one alarm, you test them all. Also, the test history in the Nest app updates immediately. So this was a useless suggestion. The only real way to determine which Protect is which is to compare the serial number on the back of the unit to the one listed for that Protect in the Nest app. The setup process really should have addressed this because it would have been easy to do before I got out the ladder and installed them all.

Attention Nesters!

To the fine folks at Nest who I’m hoping will read this post, you really need to have a room at your company offices that you use to educate your engineers and support staff. Every one of them should, at least once a year, be required to go into this room, remove 4 typical alarms (installed on the ceiling, not sitting on a desk) and then install Protects and go through the entire setup process. That will greatly help them understand the situations the customers face.  You should also sell at cost each of your employees as many Nest products as they need for their home. Every Nest employee should be intimately familiar with the installation and use of your products. I run a software development tools company, Xojo, Inc., and we use our software to write our software. We hire customers as engineers. This results in our staff knowing quite well what our customers go through and ultimately creates a better user experience.

An Excellent Home Upgrade

I’ve only had the Protects installed for two days but I already think they are an excellent home upgrade. I’m installing a Rachio smart sprinkler controller soon as well. It’s my understanding that it can be set up to work with Nest so that if there’s a fire, my sprinklers will automatically come on. That’s pretty cool. I’m also anxiously awaiting the release of the Yale Linus smart lock which is supposed to work with the Nest app as well. I’ll be installing those as soon as they are available.